It is a 125KHz contactless access control reader, preclude the use of advanced RF receiver circuit design and embedded micro-controller, combined with efficient decoding algorithms. It has received high sensitivity, current, single DC power supply, low price, high performance characteristics. Dust, moisture, fully sealed design allows users to install the outdoor and other harsh conditions, no mechanical wear and durability.
45mA(standby ) 70mA(Work）
TK4100, EM4100, EM4200, T5577...
Card:30--100mm , Keychain:30-40mm
Wiegand 26 & Wiegand 34 (Setting by yourself)
Distance of transmission
2PC LED (Blue means standby, Green means reader success)
Wiegand 26/Wiegand 34
(The output format is WG34 when purple line connect with black line)
Green light and buzzer long ring
1. Turn off the power and don’t live operation when installing or disassembing
2. The reader must be installed on wooden, concrete or brick wall, or placed on the table. It may not have a large area of iron and steel products within a radius of around 10 centimeters
3. Different cards has affect the distance of reader
4. If the distance of reader between two machines <0.3 m, will interfere with each other. In other words, the best distance between the reader is kept at 0.3 meters above.