Smart Card  /  RFID Label  /  RFID Reader
Anti-theft RFID Smart Gate
You are here: Home » Products » RFID Solution » Library Solution » Anti-theft RFID Smart Gate

Product Category

Contact Us
 
 steven@hecere.com
 +86-15837110243
 
 
 
Inquiry

loading

Share to:
sharethis sharing button

Anti-theft RFID Smart Gate

The device supports RFID tags comply with the ISO15693 standard. It also supports two modes of active and passive alarm. AFI, EAS and EAS + AFI alarms are optional in the active alarm mode. anti-theft doors can be installed intensively, and the same entrance can support up to ten pcs used side by side, and the channel identification distance can be up to 90cm. This product is widely used in the access control and theft prevention of libraries, archives and other fields.
  • HC-EG-I

  • HECERE

  • 8543709990

Availability:
Quantity:

1. Product Overview

1.1 Product introduction

The device supports RFID tags comply with the ISO15693 standard. It also supports two modes of active and passive alarm. AFI, EAS and EAS + AFI alarms are optional in the active alarm mode. anti-theft doors can be installed intensively, and the same entrance can support up to ten pcs used side by side, and the channel identification distance can be up to 90cm. This product is widely used in the access control and theft prevention of libraries, archives and other fields. 

1.2 Working environment conditions

The product is suitable for use in indoor library, archives, warehouses, stores, supermarkets, museums, hospitals, etc.. It requires an environment with network coverage and no rain or dust. If you want use for outdoor, please contact with manufacturer.

 

1.3 Safety and protective measures

* Power off when the equipment is disabled;

* The equipment needs to be fixed with expansion screws. It is forbidden to lean, push and pull;

* The panel is made of acrylic material, and it is forbidden to hit by gravity or sharp objects.

* Except maintenance personnel, no one is allowed to open the side maintenance panel;

* Keep the equipment clean and well ventilated

 

2. Parameters

Working Frequency

13.56Mhz

Protocol

ISO15693

Channel width

90cm

Infrared counting function

Support

Anti-theft modes

AFI, EAS, AFI+EAS

Passive Alarm

Support

3D omnidirectional sensing technology

Support

Noise detection

Support noise detection, can detect whether there is interference signal in the surrounding environment

Maximum Channel Support

9 Channels, 10pcs

Communication Interface

Ethernet

Sound and light alarm

Built-in sound and light alarm prompt function, the volume can be adjusted, can be operated by remote control.

Power

AC 100240V 5060Hz

Power consumption

30 W (Rated power 20 W)

Material

Acrylic and sheet-metal

Size

1662x636x118mm, base size of 636x118mm

Weight

23kg/pc


3. SDK

In order to facilitate users to quickly provide RFID solutions and simplify the development process, the system provides SDK secondary development kits for users to conduct secondary development. The characteristics of the development kit are as follows:

* The SDK development kit supports users to use C ++ and C # for secondary development.

* Rich secondary SDK development cases: The system provides SDK functions and cases, greatly reducing the development difficulty.


Previous: 
Next: 
Your message will be replied in 10 minutes at working time.

RFID

RFID Harsh Tag

RFID Solutions

Hecere

Quick Link

+86-15837110243
© 2021  Quanzhou Hecere Electronic  Co.,Ltd. All rights reserved. 闽ICP备2022017201号-1 Site Map. Technology by leadong.