Smart Card  /  RFID Label  /  RFID Reader
IC 13.56Mhz Access Control Reader Wiegand 26 34
You are here: Home » Products » RFID Reader » 13.56Mhz » Reader » Wiegand 26/34 » IC 13.56Mhz Access Control Reader Wiegand 26 34

Product Category

Contact Us
 
 steven@hecere.com
 +86-15837110243
 
 
 
Inquiry

loading

Share to:
sharethis sharing button

IC 13.56Mhz Access Control Reader Wiegand 26 34

IC access control reader is 13.56MHz contactless M1 abacavir root heads, preclude the use of advanced RF receiver circuit design and embedded micro-controller, combined with efficient decoding algorithms. It has received high sensitivity, current, single DC power supply, low price, high performance characteristics. Dust, moisture, fully sealed design allows users to install the outdoor and other harsh conditions, no mechanical wear and durability.
  • D12-C

  • HECERE

Availability:
Quantity:

Specificationss

Item

Parameters

Operating Voltage

DC 9V-16V

Consumed Current

0-100mA

Support cards

Mifare one( S50S70 etc.)

Read Range

0mm-100mm

(related to the card or the environment)

reader interval

0.5S

Format

Wiegand 26/Wiegand 34

(Setting by oneself)

Distance of transmission

WG26/34≥100M

Service Temperature

-25℃ ~ +75

Size

28mm×80mm×12mm

Weight

About 60G

Lead Length

180mm±5mm

Material

ABS & Resin adhesive

it’s waterproof

Status Indication

1PC LED  (Blue means standby, Green means reader success)


Line definition

Red: VCC9V-16V

Black: GND

White: Wiegand D1

Green:  Wiegand D0

Grey: Green light and buzzer long ring

Purple: Wiegand 26/Wiegand 34(The output format is WG34 when purple line connect with black line)

Notes

1. Turn off the power and don’t live operation when installing or disassembing

2. The reader must be installed on wooden, concrete or brick wall, or placed on the table. It may not have a large area of iron and steel products within a radius of around 10 centimeters

3. Different cards has affect the distance of reader

4. If the distance of reader between two machines <0.3 m, will interfere with each other. In other words, the best distance between the reader is kept at 0.3 meters above.

5. If the card still in the sensing area, the reader without any prompts, and also dont send data.

6. Access Control Reader cannt store user data and information, we cant increase the card, password and fingerprint user. It's a tool for unlocking that just expanding into the card or password , you need to rely on the access controller, attendance card machines, or multi-door controllers.

 


Previous: 
Next: 
Your message will be replied in 10 minutes at working time.

RFID

RFID Harsh Tag

RFID Solutions

Hecere

Quick Link

+86-15837110243
© 2021  Quanzhou Hecere Electronic  Co.,Ltd. All rights reserved. 闽ICP备2022017201号-1 Site Map. Technology by leadong.